Mercedes-Benz 190 E 2.3 1991, Owner'S Manual

Page: 41 / 129

1 Latch plate
2 Buckle
3 Release button
Fastening
Pull belt with latch plate (1) across
shoulder and lap so that the lap belt is
positioned as low as possible on your
hips and not across the abdomen. Do
not twist the belt. For safety reasons,
avoid adjusting the seat or seat back
into positions which could affect the
correct seat belt position.
Push latch plate (1) into buckle (2) un­
til it clicks.
Adjust front seat belts so that the
shoulder portion of the belt is locat­
ed as close as possible to the middle
of the shoulder (it should not touch the
neck). For this purpose, raise or lower
the belt outlet (3 positions). To lower
the belt outlet, press button (4).
The shoulder portion of the seat belt
must be pulled snug and checked for
snugness immediately after engaging
it and during driving. Tighten the lap
portion to a snug fit by pulling shoulder
portion up.
I
39
O
p
e
ra
tio
n