Mercedes-Benz 190 E 2.3 1991, Owner'S Manual

Page: 35 / 129

Caution!
Do not remove head restraints except
when mounting seat covers. For
removal refer to “ Practical Hints” ,
page 98. Whenever restraints have
been removed be sure to reinstall
them before driving.
Important!
Prior to operating the vehicle, the
driver should adjust the seat height for
proper vision as well as fore/aft place­
ment and seat back angle to insure
adequate control, reach, operation,
and comfort. The head restraint
should also be adjusted for proper
height.
Both the inside and outside rear view
mirrors should be adjusted for ad­
equate rearward vision. Fasten seat
belts. Infants and small children
should be seated in a properly se­
cured restraint system that complies
with U.S. Federal Motor Vehicle
Safety Standard 213 and Canadian
Motor Vehicle Safety Standard 213.1.
All seat, head restraint, and rear view
mirror adjustments as well as fast­
ening of seat belts should be done be­
fore the vehicle is put into motion.
1039
Power Seats, Front
The switches are located in each front
door, if your vehicle is equipped with
front power seats.
Turn key in steering lock to position 1
or 2 (with the driver’s or front
passenger’s door open, the power
seats can also be operated with the
key removed or in steering lock
position 0).
Seat and head restraint adjustment:
A Seat cushion adjustment.
B Seatback adjustment.
C Head restraint adjustment.
Adjust head restraint to support
the back of the head approxi­
mately at ear level. The head
restraint can also be tilted forward
by hand.
Note:
If the car is equipped with power
head restraints, do not try to
operate manually.
33
O
p
e
ra
tio
n