REMOTE CONTROLLER OPERATION
3
REV 3.0
CODE
SWITCH
1.
CODE SWITCH: Codes are set by
pushing dip switches up or down.
It is imperative that the code used
for both transmitter and receiver
is exactly the same; otherwise
remote controller will not work.
Please note the code switch will
enable you to operate a second
remote controller independently.
For example, if you have two
ceiling fans with 2 remote control
units, set 2 different codes for each
set of transmitter/receivers. This means you can operate each ceiling fan independently.
Possible
DIP
Switch
Setting
(ON
setting
represented
by
1;
OFF
setting
represented
by
0)
0000
0100
1000
1100
0001
0101
1001
1101
0010
0110
1010
1110
0011
0111
1011
1111
2.
Your remote control is ready for use after a 9V battery installation.
FUNCTIONAL
BUTTONS
ON
REMOTE
HANDSET
HI:
Press once to turn on the fan at high speed
MED: Press once to turn on the fan at medium speed
LOW: Press once to turn on the fan at low speed
OFF: Press once to turn off the fan
LIGHT:
Press once to toggle the light on or off
: Reserved button (no function)
NOTE
‐
Turn
on
isolation
switch
(wall
switch)
before
operating
remote
controller.
‐
Turn
off
isolation
switch
(wall
switch)
when
not
in
use.
‐
It
is
a
sign
of
weak
battery
when
the
transmitter
needs
to
be
held
at
an
increasingly
closer
distance
to
fan
in
order
to
work.
Replace
a
new
battery
when
voltage
is
running
low.
