manualshive.com logo in svg

Mercado Medic REAL 8000 PLUS, Instructions For Use Manual

Share
Download
Mercado Medic REAL 8000 PLUS Instructions For Use Manual Download Page 46

9. Instructions for destruction

Devices permanently decommissioned must be dismantled and sorted in a correct and 

safe manner. The website 

www.mercado.se/en/mercado-document

 there are installation 

instructions that can also be used to dismantle the device's components. The components 

should then be discarded in the relevant manner, see 9.1. Recycling sorting. 

Warning! Installation, connection or dismantling is not risk-free. If components are 

handled incorrectly, for example, crushing damage may occur. This type of work may 

therefore only be carried out by a Mercado Medic authorised technician.

9.1. Recycling

Instructions for recycling of components. 

Metal:

•  Armrest mechanism
•  Backrest mechanism
•  Neck support mechanism
•  Leg support 
• Base
•  Seat frame 
• Actuator
•  Lifting mechanism
•  Other metal parts 

in devices sold by 

Mercado Medic

Electronics:

• Cabling
•  Control box (batteries 

to be dismantled and 

recycled separately)

•  Contact box
•  Hand-held controller
•  Control buttons

Lead battery:

•  Batteries (discarded 

batteries should always 

be taken to environmental 

recycling centres)

Combustible:

• Seat
• Backrest 
•  Neck support
• Armrests 
•  Other padded parts sold 

by Mercado Medic

46

Instructions for use for REAL 8000 PLUS Ophthalmology medical clinic chairs

Instructions for destruction

21-08997-EN-00

Summary of Contents for REAL 8000 PLUS

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands