Step 8 - Assemble Springs
After having secured the spring in the "Zero Point", Count to 36 holes on the opposite side of the frame and put a
Spring in the same way as in the previous step. For a uniform distribution of the
s
pring tension and ease of installation,
t
he
s
prings must always be installed at opposite sides of the main frame of an Alternating Way, i.e., Zero after 36,
followed by 18 and 54 as shown in Figure 8.
Tip: the number of triangular Rings sewn in the table is equal to the number of holes in the main frame. Note that
if you miscounted a triangular
h
ole or ring, remove and reinstall the Springs in the necessary Place, maintaining a
uniform distribution of tension as detailed above.
36
ZERO
18
54
SPRINGS (#7)
Trampoline Mat
(# 1)
FIGURE
8
12
