9
10. Runbelt Adjustion
(1) Running belt deviate to left
Start the machine at 2-3Km/h without loading, adjust by tightening the left side
clockwise for a quarter of half turns(see fig1). keep running the machine without loading for
1-2 minutes. Please adjust like this till the belt move to mid place.
(2) Running belt deviate to right
Start the machine at 2-3Km/h without loading, adjust by tightening the right side
clockwise for a quarter of half turns(see fig2). keep running the machine without loading for
1-2 minutes. Please adjust like this till the belt move to mid place.
(3) Running belt logjam
If the running belt is in dead condition, it can be adjusted by loosening both sides
evenly.Turn
counter-clockwise to loosen the running surface.
(4) Running belt slippy
If the running surface becomes slippy it can be adjusted by tightening both sides
evenly.Turn clockwise
to
tighten the running surface.
11. Daily Maintain
1. Please switch off and cut off power before checking the machine or clearance.
2. Clear belt and dial plate after used, one time every week at least.
3. Check and tight screws and spines at fixed period.
4. Do not hang up clothes etc to the machine,
