GENERAL SPECIFICATIONS
ASSEMBLY AND INITIAL USAGE
UNPACKING
The packing should contain the following items:
• the robot,
• the transport trolley (to be assembled),
• the control unit,
• a folder containing the user manual.
To unpack these items, proceed as follows:
• Take out the box located on the robot : this contains the control unit.
• Remove the components from the trolley - Figure 1:
• 2 top tubes: right (1) and left (2),
• 1 control unit hook (3),
• 2 cable hooks: top (4) and bottom (5),
• 1 hook cover (6)
and a fastener kit containing:
• 2 special bolts for plastics (7)
• 4 long bolts (8)
• 4 nuts (9)
• 1 spanner
• Lastly, take out the bottom part of the trolley(10).
Make sure the robot has not sustained any damage in transit
(shocks, broken parts, etc.). If you find anything that is not as it should
be, don’t hesitate to contact your dealer before using the robot.
ASSEMBLING THE TRANSPORT TROLLEY
Top Part – Figure 2.
a) • Position the top tubes (1) et (2) on the hook (3),
b) then fit the cable hook (4) - the tubes should be positioned
to the side of the cable hook.
c) • Insert the bolt (7) above the cable hook and tighten it with
the spanner.
d) • Insert the long bolts (8), into the control unit hook,
holding the nuts (9) in the hook, then tighten them.
2
3
F
ig
ur
e
1
1
2
3
4
5
6
7
8
9
Fig
ur
e
2
a
b
c
d
10
Summary of Contents for emily
