1:1
5
Page8
ASSEMBLY INSTRUCTION
Attach the Water Bottle Holder (36) to the
Upright (2) with two M4 x 16mm Flange Screws
(69); start both Flange Screws, and then tighten them.
6
7
Tip: Avoid pinching the wire. Attach the Handlebar(6)
to the Upright(2) with two M8x30mm Screws(13), two
M8 Split Washers(14), and two M8 Washers(60); start
both Screws, and then tighten them.
Connect the wire (C) on the Console to the Upright Wire (40).
Insert the excess wire into the Upright.
Tip: Avoid pinching the wire.
Attach the Console(5) to the
Upright (2) with two M5x12mm Screws (62); start both Screws,
and then tighten them.
Then, plug the Pulse Wire (39) into the receptacle on the back
of the Console (5).
Avoid pinching the wire.
36
69
2
14
60
13
2
6
2
5
40
62
39
C
Summary of Contents for MR-632
