22318.37.01 15.09.05
8
8. Connection and Configuration Settings.
8.1. Field Wiring.
The Loop wiring is accessed through the back plate of the Detector Head (See Fig 4). The small 2-pin
connector on the left is not used.
8.2. DIP Switch Settings.
Access to the configuration settings is through the back plate of the Detector Head (See Fig 4). The 4-way DIP
is used to select the beams sensitivity.
8.3. Typical Single Zone Wiring.
MAB50R & MAB100R
Connections
Fire Panel
Connections
Loop Start
2 core + screen cable
to next device in Loop
Loop IN
Loop OUT
Loop Finish
From last
device in Loop
Suitable fire rated cable
Junction box,
join screens here
Loop +ve
Loop -ve
www.acornfiresecurity.com
www.acornfiresecurity.com
