EN
18
SYMBOLS
Read the instructions.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
Warning: Hot surface.
TECHNICAL DATA
Rated voltage
230 V ~ 50 Hz
Output 2000 W
Cord length
0.8 m
Size
H 228 x Ø 143 mm
Volume
1.7 l
DESCRIPTION
1. Handle
2. Power switch
3. Base
4. Heating element
5. Glass
6. Filter
7. Lid
FIG. 1
USE
HOW TO USE
Before using for the first time, or if the product
has not been used for a long time, clean it by
filling it to the MAX mark with cold tap water,
allow it to boil and pour out the water.
Repeat at least once.
1. Press the lock on the handle back to open
the lid.
2. Lift the kettle off the base before filling.
Fill the required amount of water in the
kettle. The water level should be between
the MIN and MAX marks. Replace the lid
and put the kettle on the base.
3. Plug in and start the product by pressing
the power switch. The status light goes on
to show that the boiling is in progress.
4. The product switches off automatically
and the status light goes off when the
water has boiled.
5. Lift the kettle off the base and pour out
the water.
NOTE:
• Do not overfill – Pay attention to the
MAX marking, otherwise risk of
splashing. Check that the lid is closed
before plugging in the plug.
• Check that the power switch can move
freely and that the lid is properly closed.
The kettle will not switch off if the power
switch is blocked or the lid is open.
• Handle the kettle carefully and do not
open the lid when it contains hot water
– risk of scalding.
• Pull out the plug when the kettle is not
in use.
MAINTENANCE
CLEANING
• Descale the product regularly for best
functionality and life span.
• Switch off the product, pull out the plug,
and allow it to cool before cleaning.
• Do not use abrasive detergent or utensils
on the kettle or any part of it, this can
scratch the surface.
Summary of Contents for 014816
Page 3: ...1 1 7 5 4 3 2 6 ...
