EN
25
• The thermal cushion does
not contain any parts that
can be repaired by the user.
• Switch off and unplug before
maintenance and moving.
Unplug the plug from the
power point when the
thermal cushion is not in use.
• Switch off the thermal
cushion and unplug the plug
from the power point before
maintenance and moving.
• Store in a dry, well-ventilated
place if the thermal cushion
is not going to be used for
some time.
• Do not switch off the thermal
cushion by just unplugging it.
Always unplug the plug from
the power point when the
thermal cushion is not in use.
• Never immerse the thermal
cushion or remote control in
water. Do not attempt to
cool the thermal cushion by
using water or gas.
• Do not use solvents or bleach
to clean the thermal
cushion. Do not tumble-dry.
Do not use an iron. Do not
use a heater fan to dry it.
where there is a high content
of chemical substances or
moisture.
• Do not plug the thermal
cushion into a power point
where there is a lot of activity
and where there is a risk of it
being pulled out by mistake.
• Do not use thermal cushion
in bathrooms, laundries,
near showers, pools or other
similar places indoors. Do
not put the thermal cushion
in places where it could drop
down into water.
• Do not allow the power cord
to come into contact with the
hot parts of the thermal
cushion when in use.
• Protect the power cord from
hot surfaces.
• Do not use the thermal
cushion outdoors. Do not use
the thermal cushion near an
open window.
• Do not use the thermal
cushion together with a
timer or equivalent that
automatically switches on
and off – risk of fire.
Summary of Contents for 014420
Page 3: ...1 1 ...
