EN
25
3. Fasten the zinc pan (4) at the front holes
in the casing (by the junction box) with
the M4 (5) nuts and the long screws.
4. Put the two rubber coated connections
to the left and right of the straight metal
tube.
FIG. 3
5. Put the heating element on the zinc pan
and check that the hole underneath
engages with the metal hook.
FIG. 4
6. Fit the grill rack on top.
FIG. 5
STAND
1. Put part A1 in part A2 as shown in the
above diagram.
2. Put a M5 screw through part A3, the parts
fitted in step 1 and part A4, and lock with
the A5 nut.
3. Fit the other three legs in the same way.
4. Fit the small rack A8 and place the grill
over the stand.
FIG. 6
Parts
A1. Short tube
A2. Long tube
A3. Short metal shelf
A4. Long metal shelf
A5. Wing nut
A6. Screw M5
A7. Mounting piece
A8. Small rack
SYMBOLS
Read the operating instructions.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
Warning: Hot surface!
TECHNICAL DATA
Rated voltage
230 V, 50~60 Hz
Output 2200 W
Grill surface
380 x 220 mm
Size
L 470 x W 480 x H 755 mm
DESCRIPTION
1. Casing
2. Metal hook
3. Plastic foot
4. Zinc pan
5. Nut M4
6. Straight metal tube
7. Rubber coated connections
8. Heating element
9. Grill rack
FIG. 1
ASSEMBLY
GRILL
1. Fit the four plastic feet on the casing.
FIG. 2
2. Insert the straight metal tube (6) through
the two holes in the zinc pan (4) and
casing (1) on two sides.
