EN
15
• Always disconnect the power cord from
the mains power when the blender is
not in use.
MAINTENANCE
CLEANING
• Unplug from the mains outlet.
• Clean the blender under running water.
Stand upright to dry, so that all the water
runs out.
• Wipe the motor unit with a damp cloth.
• Dry carefully with a dry cloth.
IMPORTANT:
Be careful, the blades are very sharp.
WARNING!
• Do not use detergents or abrasive
agents.
• Never immerse the product, the power
cord or plug in water or any other liquid
– Risk of electric shock.
Quick cleaning
The accessories can be quickly cleaned by
running them for a few seconds in a bowl with
a little water.
SYMBOLS
Read the instructions.
Approved in accordance with
the relevant directives.
Recycle a discarded product
in accordance with applicable
regulations.
Safety class II.
TECHNICAL DATA
Rated voltage
230 V, 50~60 Hz
Power 200 W
Cord length
0,9 m
Dimensions
H 340 x L 50 x W 50 mm
Weight
428 g
DESCRIPTION
1. Power switch
2. Hand blender
3. Blades
FIG. 1
USE
1. Plug in the plug.
2. Place the blender in the food and hold the
power switch to start.
3. Switch off by releasing the power switch.
NOTE:
• Do not run the blender for longer than
one minute. Allow it to cool for one
minute before using again.
• After two cycles of use the blender
should be allowed to cool for three
minutes before it is used again.
Summary of Contents for 009101
Page 3: ...1 1 2 3 ...
