EN
69
PROBLEM
CAUSE
ACTION
It is difficult to close the lid.
Seal is not correctly fitted.
Fit the seal correctly.
The float has stuck.
Gently press the float.
It is difficult to open the lid.
The float is in the top position.
Gently press the float with a pin.
The pan is pressurised.
Wait until the pressure is
relieved before opening the lid.
Steam is leaking out from
under the lid.
Seal is not correctly fitted.
Fit the seal correctly.
Scraps of food on the seal.
Clean the seal.
The seal is damaged.
Replace seal.
The lid is not properly closed.
Close the lid correctly.
Steam is leaking out through
the float valve.
Scraps of food on the float
valve seal.
Clean the float valve seal.
The float valve seal is worn or
damaged.
Replace float valve seal.
The float does not rise.
Too little food and water in the
pan.
Add food and water according
to recipe.
Steam is leaking out from
under the lid or through the
pressure relief valve.
Take the appliance to an
authorised service centre to be
checked, repaired or adjusted.
Steam is continuously forced
out through the pressure relief
valve.
Pressure relief valve is not in
closed position.
Turn the pressure relief valve to
closed position.
Pressure regulation does not
work.
Take the appliance to an
authorised service centre to be
checked, repaired or adjusted.
The power status light does not
go on.
The power point is without
power.
Check the power point.
Rice half cooked or too hard.
Too little water.
Add more water.
The lid was opened too soon.
Wait 5 minutes after cooking
before opening the lid.
Rice is too soft.
Too much water.
Use less water.
Summary of Contents for 006783
