EN
19
USE
Switch off the foot bath and pull out the plug
before filling.
1. Fill the container with warm water.
2. Plug in the plug and start the foot bath.
3. Sit down and put your feet in the
container.
4. Turn the function selector to the required
mode.
0: Off
1: Vibration
2: Bubbles and heat
3: Vibration, bubbles and heat
5. Move your feet backwards and forwards in
the container, or use the massage roller
for pleasant and relaxing foot massage.
The foot bath has a heater element to preserve
the temperature of the water filled in the
container.
EMPTYING
1.
Switch off the foot bath and pull out the
plug.
2. Tip the foot bath so that the water runs
out through the spout. Never allow water
to run over the control.
MAINTENANCE
CLEANING
• Pull out the plug and allow the foot bath
to cool before cleaning. Clean the foot
bath with a damp cloth.
• Do not expose the control to water or any
other liquid.
• Wipe the foot bath with a dry cloth.
• Never use abrasive agents, solvents or
detergents.
• Make sure that power cord does not get
entangled.
STORAGE
Switch off the foot bath, pull out the plug and
clean it before putting it away.
• Store the foot bath in the original pack, in
a clean and dry place.
• Do not wind the power cord round the
foot bath.
• Do not hang up the foot bath with the
power cord.
Summary of Contents for 005638
Page 3: ... 1 1 2 3 4 5 ...
