Menuett 005359, Operating Instructions Manual

Page: 30 / 32

EN
30
TECHNICAL DATA
Rated input voltage, transformer 230 V ~ 50 Hz
Rated output voltage, transformer 32 V
Safety class II
Output 140 W
Battery 25.2 V Li-Ion 2200 mAh
Run time 25 min
Charging time 5 h
Size H1150 x D220 x W250 mm
Dust container 650 ml
DESCRIPTION
1. Tube with cord
2. Floor nozzle with power supply
3. Accessories
4. Release button for accessories
5. Dust container
6. Cover for HEPA filter
7. HEPA filter
8. Power switch
9. Casing
10. Battery
11. Wall mount
FIG. 1
ASSEMBLY
1. Insert the battery.
FIG. 2
2. Fit the floor nozzle on the tube.
FIG. 3
3. Connect the tube with the floor nozzle to
the intake tube on the vacuum cleaner.
FIG. 4
4. Fit an accessory on the tube, or on the
intake tube.
FIG. 5
USE
VACUUM CLEANING FLOORS AND
CARPETS
1. Press the power switch to start the vacuum
cleaner.
2. Check and clean at regular intervals the
nozzle pad and brush to avoid scratching
sensitive flooring.
VACUUM CLEANING TABLES,
FURNITURE, CAR SEATS ETC.
1. Release the tube by pressing the release
button.
2. Fit an accessory.
3. Press the power switch to start the vacuum
cleaner.
CHARGING
1. Plug the mains adapter into a power point.
2. Check that the vacuum cleaner is switched
off and connect the cord to the vacuum
cleaner.
The charge status lights flash slowly during
charging. When the battery is fully charged
all four status lights stay on. It takes 5 hours
to fully charge the battery the first time.
3. Keep the mains adapter connected to the
vacuum cleaner when not in use to ensure
that it is always ready to use. It is normal
for the mains adapter to become warm
during charging.
To think about when charging
• When the battery is fully charged all four
status lights stay on until the mains adapter
is disconnected, or the power is switched
off.
• If the surface temperature of the battery is
less than 0 or higher than 50°C during the
charging the charging will be interrupted to