EN
2
4
1. Catch for front panel
FIG. 3
ASSEMBLY
NOTE:
Always pull out the plug before changing
accessories.
1.
Push the suction hose into the intake
opening on top of the appliance until it
clicks in place.
2.
Press both extension tubes together.
3. Press the full extension tube onto the
handle.
4. Press the floor nozzle onto the extension
tube.
USE
Before use
NOTE:
The power cord on the appliance winds in
automatically.
Once all the accessories are fitted, extend the
power cord to the required length and plug
in. A yellow mark on the power cord shows a
suitable extension length. Do not pull out the
power cord past the red mark.
1.
Start the appliance by pressing the power
switch once.
2.
Wind in the power cord by pressing the
rewind button. Always hold on to the plug
when winding in the power cord.
USING ACCESSORIES
There is a combined radiator and brush nozzle.
1.
Position 1 as shown in the diagram is used
for places that are hard to reach, such as
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Rated voltage
230 V ~ 50 Hz
Output
750 W
Cord length
3 m
Product: General purpose vacuum cleaner
COMMISSION REGULATION (EU) No 666/2013
of 8 July 2013 implementing Directive
2009/125/EC of the European Parliament
and of the Council with regard to ecodesign
requirements for vacuum cleaners.
DESCRIPTION
1. Hose
2.
Motor unit
3.
Extension tube
4.
Extension tube
5. Floor nozzle
6.
Handle
FIG. 1
1. Suction nozzle
2.
Suction pressure indicator
3.
Cord rewind button
4.
Power switch
5. Power cord
6.
Outlet grille
7. Front panel
8. End cover
9.
Bottom cover
10. Back wheel
FIG. 2
Summary of Contents for 004667
Page 3: ...1 2 5 1 2 4 3 1 2 3 4 5 6 10 9 7 6 8 ...
Page 4: ...3 5 7 4 6 8 1 ...
Page 5: ...9 11 10 12 ...
