BBXHardwareInstallationGuide 1_3.doc
November 25, 2004
Page
7
of
16
Suite 230, 2891 Sunridge Way NE, Calgary Alberta, T1Y 7K7
♦
Phone: (403) 777-3760
♦
Fax: (403) 777-3769
2 BBX Mounting Plate
The Mounting Plate is supplied with each unit, and allows the BBX to be mounted in a
variety of locations and orientations. The mounting location is application specific. The
BBX does not have an interactive user interface and thus can be installed out of sight (i.e.
under a car seat, or in the trunk). Installing the BBX out of sight not only increases the
aesthetic properties of the installation but also limits the access by drivers and
passengers to the cabling.
The Mounting plate is first fastened to the car interior using bolts or other appropriate
means. Hardware has not been supplied for this step as it will vary depending on the
thickness and type of material the mounting plate is attached to. The BBX unit can then
be attached to the mounting plate using the supplied thumbscrews.
5.1200"
6.5000"
4.0000"
1.7500"
2.7750"
5.8750"
Figure 1: Mounting Plate Dimensions
Mounting Hardware:
•
Mounting Plate and Thumbscrews (supplied)
•
Mounting Plate Hardware (not supplied)
4 x 0.17” Mounting Holes (Fits most #8 fasteners)
Summary of Contents for BBX
Page 1: ...Hardware Installation Guide BBX ...
Page 2: ......
