23
DE
EN
Situation
B): A circuit breaker is triggered again.
Course of action:
Take the power distribution box out of service.
Charge a qualified electrician with inspection and repair.
Situation
C): Circuit breakers remain switched on.
Course of action:
Re-connect the disconnected consumer.
Situation
: A circuit breaker is triggered again.
Defective consumer.
Course of action:
Take the affected consumer out of service.
12. Storage and disposal
12.1 Storing the device
Proper storage of the device serves to maintain the correct
functioning of the device. It can also have a positive impact
on the service life of the device.
Clean the device before placing it into storage
(
Chapter 9.).
Close hinged lids for sockets, the inspection window and
any other covers.
Roll up the supply line and place it on the power distri-
bution box. If power distribution boxes are stacked, then
fasten the supply lines at the sides, at the handles, as
needed.
Store the device in its original packaging or with the aid
of suitable packaging in a clean and dry place.
A maximum of three devices can be stacked on top of
one another.
Observe storage conditions (
Chapter 4.2)
12.2 Disposal
When the device reaches the end of its useful life, it and its
packaging must be properly disposed of.
Old devices and batteries must not be disposed of with
household waste.
