15
DE
EN
8. Taking out of service
8.1 Taking the power distribution box out
of service
Disconnect the plug from the supply line.
Disconnect connected electrical consumers (
Chapter 7.2).
Close hinged lids for sockets, the inspection window
and any other covers.
Roll up the supply line and place it on the power distri-
bution box.
If power distribution boxes are stacked on top of one
another, roll up the supply lines and fasten these at the
sides, at the handles with cable ties, for example.
8.2 Removing the earthing wire
Loosen the ground terminal by rotating it to the left-
hand side.
Remove the earthing wire.
9. Cleaning
The power distribution box can be cleaned with a dry or a
damp cloth.
However, cleaning with a dry cloth at regular intervals is
recommended in order to prevent persistent soiling on the
surfaces.
Never use compressed air for cleaning purposes, because
inhalation of whirled up dust and dirt can have harmful
health effects.
9.1 Cleaning with a dry cloth
WARNING
Contact with live parts – Life-threatening danger
due to electric shock
Take the power distribution box out of service before
cleaning it with a dry cloth.
Disconnect the plug of the supply line.
Close all protective devices (e. g. inspection window,
hinged lids for sockets).
Only clean the power distribution box from the
outside.
For dry cleaning, a brush with soft bristles and a clean
cleaning cloth, suitable for plastic surfaces can be used.
