20
3.3
Advanced Operations and Display Information
Protocol Run Information and Status
When a protocol is running, the screen will display the protocol information and
status.
During the running of the protocol, the MEND Wellness
TM
uses two LED lights
to indicate the output connection. If the channel status LED CH1 or CH2 turns
on or flashes, check that your leads are inserted firmly into the jacks and your
leads are plugged into the conductive material. The common problems are
loose plugs, plugs are not inserted, the button or push pin is not inserted into
gloves or electrodes, dry skin contact needs moisture or broken wires.
The device senses the insertion of the plugs in the output jacks. If they are not
connected a message will appear on the LCD screen. And the LCD lights flash
very fast. Slower flashing lights indicate poor conductivity.
Protocol number and name
Remaining time for the running
frequency pair (Pair 1 of 10).
Remaining time for all 10 frequency
pairs in the protocol.
Output current
polarity
(
±
)
and
intensity (μA)
Waveform name
Output channel
frequencies
