Menards MASTERFORCE 260-9519 Operator'S Manual Download Page 5

Page 5 

1.  IMPORTANT SAFETY INSTRUCTIONS 

SAVE THESE INSTRUCTIONS.

1.1 

 The converter output is 120V AC and can shock or 

electrocute the same as any ordinary household AC wall outlet.

1.2 

Do not cover or obstruct the converter’s vents.

1.3 

Use the converter in a well-ventilated area.

1.4 

This converter is not intended for use by children.

1.5 

Do not expose the converter to rain or snow.

1.6 

Ensure that the converter is located away from normal traffic areas.

1.7 

Use only accessories recommended or sold by the manufacturer. 

1.8 

Do not operate the converter with damaged or undersized wiring.

1.9 

Do not operate the converter if it has received a sharp blow, been 

dropped or otherwise damaged in any way; take it to a qualified ser-

vice person. 

1.10 

Do not disassemble the converter; take it to a qualified service per-

son when service or repair is required. Incorrect reassembly may 

result in a risk of fire or electric shock. 

1.11 

Make sure the converter is not close to any potential source of flam-

mable fumes, gases or clothing.

1.12 

Do not place the converter in areas such as battery compartments or 

engine compartments where fumes or gases may accumulate.

1.13 

Disconnect both AC and DC power from the converter before attempt-

ing any cleaning. 

1.14 

DO NOT operate the converter if you, the converter, the device being 

operated or any other surfaces that may come into contact with any 

power source are wet. Water and many other liquids can conduct 

electricity, which may lead to serious injury or death.

1.15 

Do not place the converter in direct sunlight. The ideal air tempera-

ture for operation is between 50° and 80°F.

1.16 

Only connect the power converter to a 12V accessory outlet or 12V 

battery.

Summary of Contents for MASTERFORCE 260-9519

















Reviews: