Menards MASTERFORCE 260-9519 Operator'S Manual Download Page 4

Page 4 

SAFETY INFORMATION

The purpose of safety symbols is to attract our attention to possible 

dangers. The safety symbols, and the explanations with them, deserve 

your careful attention and understanding. The symbol warnings do not 

by themselves eliminate any danger. The instructions and warnings they 

give are no substitutes for proper accident prevention measures.

 Be sure to read and understand all safety in-

structions in this manual, including all safety alert symbols, such 

as “DANGER”, “WARNING” and “CAUTION” before using this jump 

starter. Failure to follow all instructions listed below may result in 

electric shock, fire and/or serious personal injury.

SYMBOL MEANING

 

 

SAFETY ALERT SYMBOL: 

Indicates DANGER, WARNING  

  or CAUTION. May be used in conjunction with other symbols 

or pictographs.

 Failure to obey this safety warning WILL result 

in death or serious injury to yourself or to others. Always follow 

the safety precautions to reduce the risk of fire, electric shock and 

personal injury.

 Failure to obey this safety warning CAN result 

in death or serious injury to yourself or to others. Always follow 

the safety precautions to reduce the risk of fire, electric shock and 

personal injury.

 Failure to obey this safety warning MAY result 

in personal injury to yourself or others, or property damage. Always 

follow the safety precautions to reduce the risk of fire, electric shock 

and personal injury.

Summary of Contents for MASTERFORCE 260-9519

















Reviews: