Technical Data
MEN Mikro Elektronik GmbH
3
Technical Data
I/O
• Up to four UARTs
- From four CPU-controlled USB channels
- Two at front panel
- Two on board, instead of on-board SATA device, on request
- Physical interface using SA-Adapters™ via 10-pin connectors
- RS232..RS485, isolated or not: for free use in system (e. g. cable to front)
- Data rates up to 1 Mbit/s
- FIFO receive and transmit buffers for high data throughput
- Handshake lines: full support; lines depend on SA-Adapters™
Mass Storage
• Serial IDE (SATA)
- One port for on-board 2.5" hard-disk drive
- One port for external device (e.g. SATA DVD Drive)
- Transfer rates up to 150MB/s (depends on hard disk, 28MB/s for 2.5" hard
disk)
- RAID level 0/1 support (depends on CPU board)
Miscellaneous
• CompactPCI® J1 and J2 are assembled for increased mechanical stability and/or
for power supply via J1
Electrical Specifications
• Supply voltage/power consumption:
- +5V (-3%/+5%), 21mA typ. (with two SA1 SA-Adapters™, w/o hard disk)
- +3.3V (-3%/+5%), 50mA typ. (with two SA1 SA-Adapters™, w/o hard disk)
• MTBF: 1,663,000h @ 40°C (derived from MIL-HDBK-217F)
Mechanical Specifications
• Dimensions: conforming to CompactPCI® specification for 3U boards
• Weight: 145g (w/o hard disk)
