Getting Started
Page 21
2.2.1
Installing an HDD/SSD
The following steps are necessary:
»
If there is already an HDD/SSD in the device, make sure that there are no write or
read processes on the disk.
»
To remove the HDD/SSD shuttle, pull the front handle on the shuttle 90° to the left.
»
Using the handle, pull the shuttle out of the shuttle slot.
»
If there is already an HDD/SSD in the device, loosen the four screws fixing the HDD/
SSD to the shuttle and slide it out:
»
Insert the new HDD/SSD into the shuttle with the screw holes facing the top.
»
Fasten the HDD/SSD by tightening the four M3x5 countersink screws.
»
Slide the shuttle back into the housing and close the handle.
SSD shule
Hard disk
