Getting Started
20NM50-00 E2
2016-05-17
Page 22
2.3
Configuring the Hardware
Check all hardware requirements before mounting the NM50 as most modifications are
difficult, or even impossible, to do once the box has been mounted.
The following check list provides an overview of what can be configured. To install the
components mentioned below, the NM50 has to be opened
»
PCI Express Mini Cards
Two PCI Express Mini Cards for wireless functions, can be installed in the NM50. LTE
(4G) and WLAN cards can be ordered as accessories from MEN
»
SIM Card
The NM50 is equipped with one SIM card slot.
2.3.1
Handling Internal Components
See
Chapter 2.3.1 Handling Internal Components on page 22
and
Chapter 2.3.2
Opening the NM50 on page 23
.
See
Chapter 2.3.3 Installing PCI Express Mini Cards on page 24
for details on the
installation of the PCI Express Mini Cards.
See
Chapter 2.2.3 Installing PCI Express Mini Cards on page 31
for details on the
installation and functionality of the SIM card.
Activities on the inside of the system have to be carried out by the
service person for this area, or a suitably instructed user.
Switch off or unplug the power supply of the box before working on
internal components.
Please observe the instructions concerning electrostatic discharge
whenever you work on the inside of the computer system. See
Chapter
Electrostatic Discharge (ESD) on page 8
.
