Blending Tracks (Mix)
The Memotron m2k offers the possibility to blend three tracks. To control the blending effect, you can use the
ABC Controller of the Memotron m2k or the modulation wheel of a connected master keyboard. By default,
the cross-fading of the tracks is initially configured that position A of the ABC Controller is assigned to Track
A, position B to Track B and position C to Track C.
The mix mode for each track is set in the Sound Settings with the parameters "MixC:", "MixB:" and "MixA:".
The following settings are possible:
•
Off
The blending of this track is deactivated. It can be heard constantly.
•
A:
The track can be heard at full volume in the position A of the ABC Controller or respectively
in the lower position of the modulation wheel. Moving it towards the
position B / middle position
constantly fades out the track.
•
B:
The track can be heard at full volume in the position B of the ABC Controller or respectively
in the middle position of the modulation wheel. Moving it towards the
position A or C / lower or
upper position constantly fades out the track.
•
C:
The track can be heard at full volume in the position C of the ABC Controller or respectively
in the upper position of the modulation wheel. Moving it towards the
position B / middle position
constantly fades out the track.
The assignments of the individual tracks can be selected in the Sound Settings by turning the
DATA
knob.
After a parameter has been selected, it is ready for editing by pressing the
DATA
knob. The cursor changes
its shape to an arrow. Turning the
DATA
knob, the parameter value can now be changed. By pressing the
DATA
knob again, another parameter can be selected for editing.
Memotron m2k OS v1.3 User Manual 16
Summary of Contents for m2k
Page 1: ...MEMOTRON m2k OS v1 3 User Manual...
Page 2: ......