background image

E-5

CAUTION!

THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS
AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

CAUTION!

DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT IN CABINET OR IN ANOTHER
CONFINED SPACE IN ORDER TO KEEP WELL VENTILATED CONDITION. ENSURE THAT CURTAINS
AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION CONDITION TO PREVENT
RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING.

CONNECTIONS

Speaker connections

Connect the right speaker to terminal R, with the red wire to + and the black wire to –.

Connect the left speaker to terminal L, with the red wire to + and the black wire to –.

Clip the stripped portion of the wire as shown.

AUX INPUT SOCKETS

You can connect TV. or VCR audio left and right outputs to the AUX at the rear of the system.

AC POWER SUPPLY

After all other connections have been made, connect the AC power cord to the wall outlet.

HEADPHONES SOCKET

You can plug headphones into the PHONES socket if you want to listen in private. Ensure you set the
volume to a low to avoid damage to your hearing.

PRESET EQ EFFECTS

The quality of tone can be adjusted by the preset sound equalizer which has been set into 4 modes
(CLASSIC, ROCK, POP, JAZZ). By pressing the corresponding sound preset button you can choose one
of your favourite mode according to you music style.

Memorex.p65

11/8/01, 11:11 AM

5

Summary of Contents for MX5310

















Reviews: