SET-UP INSTRUCTIONS (CONTINUED)
SETTING THE TIME
It is necessary to set the internal clock time of the phone to display the time in
the Caller ID display when incoming calls are received.
If you subscribe to Caller
ID, the time and date are automatically set when the first call is received.
If the time is not automatically set, follow the steps below:
12
3
1
2
4
5
While in the Standby mode, press
and hold the MENU/MUTE button.
Press the Key button 4 , or the
Up/Down buttons to select the
Time Set setting.
Press the EDIT/FLASH button.
Using the Key buttons, enter the
month, day, hour, minute and AM/PM
(press key button 1 for AM, 2 for PM).
The cursor will move automatically
after each entry. Enter two digits for
each setting, for example, for April,
press 0,4.
Press the MENU/MUTE button to
exit the program mode.
ＭＳＰ－ＰＨ２４００／０９１７２Ｃ（ＥＮＧＬＩＳＨ）
12/16/01, 12:29 PM
13
