manualshive.com logo in svg

Memorex MPH2430, Operating Instructions Manual

Share
Download
Memorex MPH2430 Operating Instructions Manual Download Page 15

14

SET-UP INSTRUCTIONS (CONTINUED)

SETTING THE TIME AND DATE

Change the Time and Date as follows:

Press and hold the VOICE MAIL/
MENU button for more than two
seconds; the Ringer Volume setting
will appear in the display.

1

Press the Scroll Down button 

❶ 

three

times or the 4 key button 

❷

; the Time

Setting will appear.

2

1

2

Press the EDIT/FLASH button to
change the setting; the month setting
will blink.

3

Set the month using the Key buttons
(0-9). Repeat this step to set the date,
hour, and minutes; the AM/PM
indicator will then be blinking.

4

Press the 1 Key button to choose AM

❶ 

or the 2 Key button 

❷

to choose

PM.

2

1

5

When finished, press and hold the
SAVE/RE/PA button 

❶ 

for more than

two seconds; a long beep will be heard
to confirm the setting has been saved.
You can continue with programming or
press the VOICE MAIL/MENU button

❷

to return to the Standby mode.

1

2

6

MPH2430.O/M.QXD  1/29/03  9:12 AM  Page 14

Summary of Contents for MPH2430



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands