Entering a Pause in Memory Dialing
If you would like to use a
phone number stored in
memory to access voice mail,
for example, you can store a
pause in the phone
number sequence.
To use this function, follow
steps 1 and 2
in “Storing a
Number in Memory,” then
press the
PAUSE
button on the
handset to place a pause in the
phone number sequence.
Follow the remaining steps in the “Storing a Number in Memory”
section to complete the operation.
Storing Mixed Tone/Pulse Numbers
If your phone is set up for pulse dialing, you can store a mixed
mode number (up to 16 digits) to easily access long
distance services.
1. Remove the handset from
the base and press
MEM
.
The
TALK
LED flashes and
you hear a beep.
2. Enter the number to be
dialed in pulse mode.
3. Press the
/TONE
button
on the handset. The
/TONE
button counts as
one digit and enters a pause.
4. Enter the number(s) to be dialed in tone mode.
5. Press
MEM
and a number (0-9) on the keypad for the
memory location you wish to use. You hear a long beep and
the
TALK
LED goes out.
Dialing a Stored Number
To dial a phone number stored in memory, press
TALK
, then
press
MEM
and the memory location (0-9). Your phone will dial
the stored number.
One-Touch Dialing
Your phone is equipped with three “One-Touch Priority” keys for
instant dialing (
M1
,
M2
,
and
M3
).
You cannot store phone
numbers directly into
M1
,
M2
, and
M3
. They are only used
to dial phone numbers stored into memory locations 1, 2, and 3
on the keypad.
1. To instantly dial phone
numbers stored in
memory locations 1, 2,
or 3, simply press
M1
,
M2
, or
M3
.
(There is no
need to press
talk
, the
phone will
automatically dial.)
2. If no phone number was
stored in memory
locations 1, 2, or 3 on
the keypad, pressing
M1
,
M2
, or
M3
will
do nothing.
Chain Dialing
After dialing a number you may be requested to enter a special
access code, for example, when performing a banking transaction.
1. Store the access code into one of the memory locations (0-9).
2. Dial the main number.
3. Press
MEM
and the memory location of the access code at the
appropriate time.
9
NOTE
If you select a memory location that does
not have a stored number, the handset will
beep rapidly and the phone will not dial.
NOTE
Remember, the phone number you wish to
store cannot have more than 16 digits,
including the pause. (The
PAUSE
button
counts as one digit.)
oper
wxyz
pqrs
tuv
✱
✱
H:...MPH 6955 Map OM.vp
Mon Jun 28 16:00:20 1999
Color profile: Disabled
Composite Default screen
