MEMOLUB® PLCD (PLC)
Lubricant dispenser
www.memolub.com
2
/
7
Introduction
Refillable autonomous and programmable lubricant dispenser for one or multiple lubrication points
Lubrication is an important part of maintenance. The lubricant dispenser, the lubrication point, the quantity, and
the frequency are the primary elements of effective lubrication, and therefore also of optimal productivity. In
modern factories, the lubrication points are greased by means of centralized systems. These are very efficient
when they are well maintained, regulated and controlled. The remainder is mainly lubricated manually or with
small independent lubricators at low pressure.
MEMOLUB PLCD (PLC) is a powerful (25 bar) and precise electro-mechanical lubricant dispenser with the
purpose of centralizing and automating the lubrication. It functions independently, contains
an oil or grease bellow, and is driven by the PLC control system. A progressive distributor can be used
to lubricate several points simultaneously. It can also (if feasible) be mounted directly at the lubrication
point, or convey the lubricant through lines to the lubrication point.
Specifications
Dimensions and capacities
Standard
Mega
Giga
115 x 101 mm
147 x 101 mm
228 x 101 mm
120 cm
3
(ml)
240 cm
3
(ml)
480 cm
3
(ml)
Electronic control
Quartz clock, microprocessor
Stop, Start
Immediately
Lubricant types
Oil & grease (up to NLGI grade 2)
Supply
24 V DC
Temperature range
From -15 °C to +50 °C
Conveying pressure
25 bar (piston pump)
Lubrication points
1 to max. 8 outputs (with progressive distributor)
Remote installation monopoint
Line length up to 10 m
Remote installation multipoint
Line length 4 m per lubrication point
Screwed connector
¼ inch R
Protection class
IP66
Conveying volume max.
0.635 cm
3
(ml)
Conveying volume min.
0.13 cm
3
(ml) with dosage washers
