28
D33142 | Date 03/2017
Operation and control
►
When the appliance is in remote control mode, the
symbol appears in the temperature display:
5.4.4
Manual mode
In this operating mode, the appliance runs in permanent
operation at the values set on the ControlCOCKPIT.
Adjustment options
As described in chapter 5.4.2 , you can set the following
parameters after pressing the corresponding activation key (in any sequence):
Temperature
Adjustment range: dependent on model and operating mode (see
nameplate and technical data on page 14)
Heating operation is indicated by the symbol.
Cooling is indicated by the symbol.
You can select °C or °F as the temperature unit displayed (see
page 46).
22
.4
37
.0
TEMP
Set
°C
°C
Fan speed
Adjustment option: 10 % to 100 % in steps of 10%
FAN
%
50
FAN
FAN
Humidity
Adjustment range: 10 to 80 % rh
Humidification is indicated by the symbol.
Dehumidification is indicated by the symbol.
HUMIDITY
70
%rh
Set
34
% rh
A high level of air humidity in the interior can only be achieved without condensation if the
interior is thoroughly heated. For this reason, how fast the humidity is dynamically adjusted
to approach the setpoint depends on the interior temperature.
Interior lighting (only ICHL)
Adjustment range:
Daylight (DL) on (100 %) or off (0 %)
UV light (UV) on (100 %) or off (0 %)
LIGHT
%DL
100
%UV
0
Setting interior lighting
1.
Activate light display. To do so, press the
activation key on the left side of the light
display. The daylight entry
DL
is selected
automatically.
Holz tro
aufheize
09:12h
Fr 20.10.20
min
000°C
ALARM of °C
max
000°C
auto off
99K
-
+
0
12
°C
GRA
ON
LIGHT
ON
LIGHT
ALARM
max
38
.5°C
auto
0.0
K
min
35
.5°C
+-
Manual M
12.Sept.201
LIGHT
%DL
0
%UV
0
23
.2°C
TEMP
Set 38
.0°C