manualshive.com logo in svg

Memmert hpp 1400, Operating Instructions Manual

The Memmert HPP 1400 Operating Instructions Manual is a comprehensive guide designed to assist users in effectively navigating the features and functionalities of the Memmert HPP 1400 device. Available for free download on our website, it provides step-by-step instructions, ensuring a hassle-free experience with your Memmert HPP 1400.

Share
Download
background image

D33464 | Date 09/2018  

47

Menu mode

7.3.8  

 Gateway

The setup entry 

Gateway

 is used to connect two networks 

with different protocols.
The gateway is set the same way as the IP address (see 

page 43).

7.4  

 Date and Time

In the 

Time

 display, you can set date and  time, time zone and daylight saving time.

Always set the time zone (and summer time yes/no) before you set the date and time. 

Avoid changing the set time after that since this can lead to gaps or overlapping when 

recording measured values. If you still need to change the time, you should not run a 

programme immediately before or after doing so.

1.  Activate the time setting. To do so, press 

the activation key on the right side of 

the 

Time

 display. The display is enlarged 

and the first adjustment option (

Date

) 

automatically highlighted. 

Date and time

Time
Time zone
Daylight savings

12

.

05

.

2012

12:00
GMT 01:00

Date

2.  Turn the turn control until 

Time zone

 is 

highlighted.

   

Time

Daylight savings

12.05.2012
12:00
GMT 

01:00

Date

Time zone

3.  Accept the selection by pressing the 

confirmation key. 

   

Time

Daylight savings

12.05.2012
12:00
GMT 

Date

Time zone

01:00

4.  Set the time zone of the installation site 

with the turn control, e.g. 00:00 for Great 

Britain, 01:00 for France, Spain or Ger-

many. Accept the selection by pressing 

the confirmation key.

   

Time

Daylight savings

12.05.2012
12:00
GMT 

Date

Time zone

00:00

5.  With the turn control, select the 

Daylight 

savings

 entry 

   

Time

12.05.2012
12:00
GMT 00:00

Date

Time zone

Daylight savings

Balance

Remote Control  Off

Gateway  

              

192.168.5  .1

+30 %

2/2

Summary of Contents for hpp 1400

































































Reviews:

No comments

Related manuals for hpp 1400

Brands by name

Popular brands

Load more brands