manualshive.com logo in svg

Memmert HCP Series, Assembly Instructions For Stacking

The Memmert HCP Series user manual is your essential guide for efficient and safe operation. Easily downloadable for free from our website, it provides comprehensive assembly instructions for stacking your equipment. Ensure optimal performance and get the most out of your Memmert HCP Series products with this essential manual.

Share
Download
background image

11

ICO/ICOmed/HCP stacking  

D39166 | date 09/2019

3.4  Fitting wall brackets

NOTICE

The adjustable wall brackets from the stacking set must be used for size 150 and 240 

appliances.
1.  Remove one M3x6 Torx screw from each of the appliances on the left or right side of 

the frame.

2.  Fit the wall brackets to the rear frame.
3.  Drill holes, insert dowels and screw the tilt protection brackets into a suitable wall. 

 

►

Since the conditions (wall structure) at the installation site are unknown, no dowels 

or similar materials for wall mounting are included in the scope of delivery.

The installation is now completed.
The distance from the wall can be adjusted by unscrewing the Allen screws and pulling 

the bracket out. 

 

Summary of Contents for HCP Series

















Reviews:

No comments

Related manuals for HCP Series

Brands by name

Popular brands

Load more brands