Memjet OWN-X Speedstar 1000, Quick User Manual

Page: 18 / 21

-18-
User Interface
Provides access to the Printer User Control screen. From this screen you can Clear Errors,
Cancel a Job, Reset the Job Counter, and Reset the Page Counter. You can also perform some
maintenance and operating tasks such as:
Clear Error: If the engine is in error status, possible to delete with this button. There are some fatal
state what can’t possible to delete.
Cancel job: delete the actual jobs. For example, if the machine is in error state and don’t delete the
jobs, then after cancel job will print out gain the missed jobs.
Reset job counter: this will reset the job counter
Reset Page Counter: this will reset the page counter
Wipe Printhead: this is a cleaning service issue. It will make a little clean on the printhead.
Circulate Ink:
Purges air from the lines and primes the system after replacing the Ink Tanks or
Printhead Cartridge.
Release Printhead:
Performs the same task as the Cover Release Button on the Printer. Pumps the
ink back into the Ink Tanks and opens the Printhead Cover to remove/install the Printhead
Cartridge.
System Deprime:
Pumps the ink back into the Ink Tanks prior to replacing the Printhead Cartridge or
transporting the Printer.
Eject Maintenance Module: this will give out the service station. If would like to remove it then
use this at first. If not possible to use this button still can remove it manually.
Install Maintenance Module: this will call home the service station.
Wiper Inspection:
Shutdown:
Turns the Printer off from your computer.
Pinch Media: this will feed the media.
Retract media: this will unfeed the media
Request Pause: send pause command
Clear Pause: clear pause state
KWS setting: 0, default, 7- IMPORTANT! if change the default settings then the printhead
loose his warranty!
Non Printing Mode:
Language:
Shutdown the Printer:
this will shut down the engine. After this the printer needs to be switched off
too.