TG2008214-MM-00
22 of 23
20180910-Ver1
TROUBLE SHOOTING
Problem:
Possible Causes:
Main Burner cannot light.
1. Check LP cylinder fuel level.
2. Bad electrode spark. Check to see if the grill will match
light. Electrode or collector may need adjustment.
3. Burner may not be properly seated.
4. Burner may be obstructed.
5. The cylinder valve may be closed.
6. Regulator is not properly seated on cylinder valve.
Fire at control knob.
1. Burner is improperly seated on control valve.
2. Gas connections may be loose. Leak Check and tighten
all connections.
3. Burner holes may be obstructed. See section on
“Burner
Cleaning
” under Maintenance and Cleaning instructions.
Yellow flame at burner.
1. Burner is obstructed. See section on
“Burner Cleaning”
under Maintenance and Cleaning instructions.
Flame blows out on
“LOW”.
1. Burner holes may be obstructed. See section on
“Burner
Cleaning
” under Maintenance and Cleaning instructions.
2. Grill is not sufficiently preheated.
3. Burner is improperly seated on control valve.
Burner does not get hot enough. 1. Flow control device has been activated in regulator. See
Regulator Resetting Procedure under Connecting LP
Cylinder and Hose / Regulator to Grill.
Grill is too hot.
1. Excess grease build-up causing grease fires. Clean the
grill according to Maintenance and Cleaning
instructions.
2. Damaged or faulty regulator. Replace with factory
authorized parts.
3. Cook on a lower temperature setting.