
Rotisserie Instructions
R ot. Screw#10-24x3/4"
UNC with
washers and nuts
M otor Bracket
Outside of left grill
bowl panel
Spit
Holding Forks
T hu mbsc r ew
3/8"x1/2"
Collar
Bushing
Handle
T hu mbsc r ew
3/8"x1/2"
Slide a Holding Fork onto each end of the Rotisserie Spit. Adjust spacing between Holding Fork
to accommodate your food, then tighten the Thumbscrews to keep the Holding Forks in position.
Slide the Collar and Bushing onto the the threaded end of the Spit. Do not tighten the Collar
Thumbscrew until the Rotisserie placed into your grill. Last, screw the Handle onto the threaded
end of Rotisserie Spit as shown.
3.
Remove all components from the carton.
Attach the Motor Bracket on the outside of the right grill bowl panel. Align the two holes of
the Bracket with the threaded holes on the grill bowl. Tighten securely using two Rot. Screws
No.10-24 x 3/4" UNC, Flat Washers and Nuts provided.
1.
2.
Rot. Screw #10-24x3/4" UNC x2
Rot. Washer x2
Rot. Nut #10-24 x2
Rot.Thumbscrew 3/8"x1/2" x3
Washer
17
#10-24 Nut.