Member's Mark Harper FRM10388SST-A Assembly Instructions & User Manual Download Page 6

6 | 

P a g e

 

 

 
 

Installation and repair should be done by a qualified service person. The appliance should be inspected before use and at least annually 
by a qualified service person. More frequent cleaning may be required as necessary.  
It is imperative that the control compartment, burners and circulating air passageways of the appliance are kept clean.  
 *Do not use this fire pit for cooking.  
 *Do not burn any other materials than are supplied with and intended for use in this fire pit.  
 *Do not pour water into fire pit.  
 *The installation of this product must conform to local codes.  
 * Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance 
and to replace any part of the control system and any gas control that has been under water. 
 *Do not store a spare or disconnected liquid propane cylinder under or near this fire pit.  
 *After a period of storage, and/or not use, the propane fire pit should be checked for gas leaks and     burner obstructions before use.  
 *Do not operate the propane fire pit if there is gas leak present.   
 *Never use a flame to check for gas leaks.  
 *Combustible materials should never be within 10 feet of the top, back or sides of your propane fire pit.  
 * Do not put any other fire pit cover or anything flammable on, or beneath the fire pit. 
 * The propane fire pit should never be used by children. Children must be supervised when they are anywhere near the appliance.  
 * Users should be alerted to the hazards of high surface temperatures and keep a safe distance to avoid burning or clothing ignition.   
 * Pay attention when operating the fire pit. It is hot in use and should never be left unattended. Do not transit fire pit while in 
operation.   
 * Should fire go out while burning, turn the gas valve off. Follow the instruction and wait five minutes before attempting to relight.  
 * Never use charcoal or any other solid fuel in the fire pit. Never parch clothing or other flammable materials on or near the fire pit.   
 * Never lean over the open fire pit or place hands or fingers on the upper portion of an operational unit.    
 * Keep ventilation openings in cylinder enclosure (FIRE PIT BODY) free and clear of debris.

 

 

* Do not rest feet on the fire pit.

  

 

* Please take out the battery when not using the fire pit for an extended length of time.

  

 * Do not enlarge valve orifices or burner ports when cleaning the valve or burner. Cylinder supply system must be

 

arranged for vapor 

withdrawal.

 

 

* LP Tank used must include a collar to protect the cylinder valve.  

 * Never fill the cylinder beyond 80% full.  
 * Do not use this fire pit on vehicles or boats. Always operate the appliance on the flat ground outdoors.  
 * Keep any electrical supply cord and the fuel supply hose away from any heated surfaces.  
 * Do not use this fire pit unless all parts are in place.  
 * Keep the appliance area clear and free from combustible materials, gasoline, and other flammable vapors and liquids.  
 * Inspect the hose before each use of the appliance.

 

 

 * If there is evidence of excessive abrasion or wear or if the hose is damaged, the hose assembly must be replaced prior to the 
appliance being put into operation.

 

 

 * Locating the hose into pathways where people may trip over it or in areas where the hose may be subject to accidental damaged.

 

 

 * Before each use, remove the glass beads. Examine the burner and its components. If dirty, clean with a soft brush and soapy water 
solution. Also examine the area around the burner. Any dirt or foreign material, such as spider webs or nests in this area should be 
removed. If it is evident that the burner is damaged, the fire table must not be used. The burner assembly cannot be replaced. Please 
contact call our customer service department at 1-866-439-9800 for technical support. 
 The LP-gas supply cylinder to be used must be:  
 1) Constructed and marked in accordance with the U.S. Department of Transportation (D.O.T.) Specifications for LP-Gas Cylinders, or 
the Standard for Cylinders, Spheres and Tubes for Transportation of Dangerous Goods and Commission,  CAN/CSA-B339, as applicable;  
2) Provide with a listed overfilling prevention device;  
3) Provide with a cylinder connection device compatible with the connection for the appliance.  

 

 
 

 

 
 
 

Need Assistance? Visit us at: samsclub.com/membersmarkhelp 

WARNINGS 

 

Summary of Contents for Harper FRM10388SST-A



















Reviews: