
5 |
P a g e
A.
Design and Installation Considerations
Place the Fire Pit on a flat and stable surface in an
outdoor location adjacent to the gas supply line or
LP gas supply cylinder. DO NOT locate the appliance
where it will get excessively wet or submerged in water.
B.
Tools and Supplies Required
Before beginning the installation, be sure that the
following tools and supplies are at hand.
□
Gloves
□
Safety Glasses
□
Wrench
C.
Inspect the Appliance and Components
□
Carefully remove all burner components from
packaging.
□
Read all instructions before beginning installation.
Follow these instructions carefully during
installation to ensure maximum safety and benefit.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
WARNING
Do NOT use this appliance if any part of it has
been under water.
Have a qualified service technician inspect the
appliance and replace any part of the control
system and any gas control which has been
under water.
WARNING
The warranty will be voided by, the following
actions:
□
Installation and use of any damaged
components.
□
Modification of the burner assembly.
□
Installation other than as instructed by the
factory.
WARNING
Inspect appliance and components for damage.
Damaged parts may impair safe operation.
□
DO NOT install damaged, incomplete, or
substitute components.
Report damaged parts to your dealer.
WARNING
Never leave Fire Pit unattended for any amount of
time.
Never sit on the Fire Pit.
Never use Fire Pit as a storage unit.
WARNING
Asphyxiation Risk
□
This gas appliance is for outdoor use in a well-
ventilated space.
□
This unit must not be installed inside an
enclosed structure or unvented appliance.
WARNING
1.
Glass media may have sharp edges. Wear safety glasses and gloves when handling.
2.
Pour the glass media evenly into the burner area (with the exception of the screen-if applicable).
The glass should be 1/2-
1”above the burner.
3.
Keep away from the unit for the first 20 minutes after igniting your unit for the first time, as glass beads
could pop out and cause injury. Should any glass beads pop out, discard them.