18
MANUALLY LIGHTING THE MAIN BURNERS WITH THE MATCH HOLDER
1. Open the lid.
2. Ensure all burners are in the “Off” position.
3. Slowly turn on the gas at the LP cylinder valve if it is not already on.
4. Place a match in the Match Holder. This is located in the top center
drawer of the grill cabinet underneath the right main burner.
5. Use the holder to slide the lit match though the cooking grates and the
front of the heat tent to the left of the burner you wish to light.
6. Press and turn the burner control knob to “HI/LIGHT”. Continue to push
in and hold up to 5 seconds or until the burner lights.
7. If the burner does not light within 5 seconds, turn the burner control
knob to “Off”. Wait 5 minutes for gas to clear, and try again.
8. When lit, turn the control knob to the desired heat setting.
LIGHTING THE BACK OR SIDE BURNERS WITH ELECTRONIC IGNITION
1. Open the lid or side burner cover
2. Ensure the burner control knob is in the “Off” position, as well as any
main burners not in use.
3. Slowly turn on the gas at the LP cylinder valve if it is not already on.
4. Turn the burner control knob to “HI/LIGHT”.
5. Depress the electronic ignition button and hold. You should hear a
clicking sound, which shows the electronic ignition is working.
6. If the burner does not light within 5 seconds, turn the burner control
knob to “Off”. Wait 5 minutes for the gas to clear, and repeat the
above procedure. Use the Manual directions if it still will not light.
7. On the back burner, continue to push and hold the electronic ignition button and control knob on
“HI/LIGHT”, 3 to 5 seconds after the back burner is lit so that the flame sensor is operating.
8. When lit, turn the burner control knob to its desired heat setting.
MANUALLY LIGHTING THE SIDE BURNER OR BACK BURNER
1. Open the lid or side burner cover.
2. Ensure the side and back burner control knobs are in the “Off”
position as well as any main burner not in use.
3. Slowly turn on the gas at the LP cylinder valve if it is not already on.
4. Place a match in the Match Holder if lighting the back burner. This
is located in the top center drawer of the grill cabinet underneath the
right main burner.
5. Strike the match, and place near the top of the burner if lighting the
side burner or near the center of the back burner if lighting the back
burner..
6. Turn the side burner or back burner control knob to “HI/LIGHT”.
7. If the burner does not light within 5 seconds, turn the burner
control knob to “Off”. Wait 5 minutes for the gas to clear,
and try again.
8. When lit, turn the burner control knobs to their desired heat setting.
Side Burner
Back Burner
Electric Igniter
Summary of Contents for BQ05046-6
Page 7: ...7 Detail Parts List ...
