Meltem 5016-1-1, Installation Manual

Page: 19 / 32

Operating instructions
M-WRG-S/Z-T(-F,-FC) / M-WRG-S/Z-T(-F,-FC)-FU ventilation unit
- 19 -
Meltem Wärmerückgewinnung GmbH & Co. KG
Am Hartholz 4 · D-82239 Alling
info@meltem.com · www.meltem.com
VENTILATION THE RIGHT WAY
V E N T I L AT I O N & H E AT R E C O V E R Y
7.3 Wireless remote control M-WRG-FUFB
NOTE
— Note that the button for the “Humidity control” ventilation program is only assigned on the
M-WRG-S/Z-T-F-FU and M-WRG-S/Z-T-FC-FU ventilation unit types.
— Note that the button for the “CO
2
control / Air quality” ventilation program is only assigned
on the M-WRG-S/Z-T-FC-FU ventilation unit type.
— Note that the ventilation unit switches to the lowest ventilation level if you select a ven-
tilation program on the wireless remote control that is not available on your type of
ventilation unit (e.g. the “Humidity control” ventilation program is not available on the
M-WRG-S/Z-T-FU ventilation unit type).
Fig. 16: InControl pushbutton sensor for type
M-WRG-S/Z-T(-F, -FC)-FU ventilation units
Reduced
ventilation
(people absent)
Increased ventilation
Humidity control
only on
M-WRG-S/Z-T-F-FU
and
M-WRG-S/Z-T-FC-FU
Normal
ventilation
(people present)
Intensive ventilation
(15 min)
CO
2
control /
Air quality
only on
M-WRG-S/Z-T-FC-FU
Supply air operation
(Summer mode)
Exhaust air operation