Installation manual
M-WRG-S...
- 28 -
Meltem Wärmerückgewinnung GmbH & Co. KG
Am Hartholz 4 · D-82239 Alling
[email protected] · www.meltem.com
VENTILATION THE RIGHT WAY
V E N T I L AT I O N & H E AT R E C O V E R Y
11.6
Fixing the ventilation unit
►
Check that the sealing tapes around the ventilation connecting pieces on the back of the
ventilation unit are undamaged. Damaged sealing tapes should be replaced immediately.
►
Attach the ventilation unit so that the ventilation connecting pieces are lined up with the
outdoor air pipe (item 1 in Fig. 27 and Fig. 28) and exhaust air pipe (item 2 in Fig. 27 and
►
Carefully push the ventilation unit onto the outdoor air and exhaust air pipes as far as it will
go.
►
Use the four cross-head screws (item 3 in Fig. 27 and Fig. 28) to fix the ventilation unit.
Lightly
tighten the screws using a diagonal sequence.
►
Use a spirit level to align the ventilation unit for surface-mount installation.
►
Tighten the cross-head screws using a diagonal sequence.
Fig. 27: Fixing the ventilation unit – surface-mount
installation
1
2
3
3
3
3
Fig. 28:
Fixing the ventilation unit – flush-mount
installation
1
2
3
3
3
3
