•
Never leave the appliance connected and un-
attended if is not in use. This saves energy
and prolongs the life of the appliance.
•
Do not use the appliance on any part of the
body of a person or animal.
•
Do not use the appliance to dry textiles of any
kind.
•
CAUTION: Do not leave this appliance unat-
tended if it is switched on.
•
Turning the thermostat control to the minimum
(MIN) setting does not mean that the iron is
switched off permanently.
Service:
•
Make sure that the appliance is serviced only
by specialist personnel, and that only original
spare parts or accessories are used to replace
existing parts/accessories.
•
Any misuse or failure to follow the instructions
for use renders the guarantee and the manu-
facturer’s liability null and void.
Instructions for use
Before use:
Remove the appliance’s protective film.
•
Make sure that all the product’s packaging
has been removed.
•
Some parts of the appliance have been lightly
greased.
•
Consequently, the first time the appliance is
used a light smoke may be detected.
•
Prepare the appliance according to the func-
tion you wish to use.
Filling with water:
•
It is essential to have filled the deposit with wa-
ter to be able to work with steam.
•
Open the lid of the filling mouth.
•
Fill the deposit taking care to observe the MAX
level(Fig. 1)
•
Close the lid of the filling mouth.
Use:
•
Unroll the cable completely before plugging it
in.
•
Connect the appliance to the mains.
•
Turn the thermostat control to the desired tem-
perature position.
•
Do not use temperatures higher than those in-
dicated on the garments to be treated.
Setting
Type of textile
•
Synthetics, Nylon, Acrylics,
Polyester, Rayon
••
Wool, Silk
•••
Cotton, Linen
MAX
Linen
•
If garment has various kinds of fibres, select
the temperature for the fibre that requires the
lowest temperature.
•
(For example, select the temperature for poly-
ester for an article made out of 60% polyester
and 40% cotton).
•
Wait until the pilot light (F) has gone out which
will indicate that the appliance has reached an
adequate temperature.
•
During use the pilot light (F) will automatically
flash on and off, thus indicating that the heat-
ing elements are operating in order to main-
tain the desired temperature.
Dry ironing:
•
The appliance has a steam flow regulator
that permits dry ironing (without steam) when
placed in the 0 position.
Steam Ironing:
•
It is possible to iron with steam whenever the
deposit is filled with water and the adequate
temperature is selected.
Steam flow control:
•
The appliance has a (C) control knob that al-
lows to get the control of the steam flow.
Spray:
•
The spray can be used in both steam and dry
ironing.
•
Press the spray button ( A ) to use this opera-
tion.
•
The spray button has to be pressed repeat-
edly to release the first spray.
Steam blast:
•
This function proportions extra steam for elimi-
nating wrinkles.
•
Press the steam blast button (B). Wait a few
seconds until vapour penetrates the fibres of
the garment before pushing the button again.
•
For optimum steam quality, do not apply more
23260_IM.indd 4
2013/08/26 10:06:48 AM
