SwitchX® 64 Port SFP+ Ethernet Switch Hardware User Manual
Rev 1.2
Mellanox Technologies
15
3
Hardware Basic Operation and Installation
3.1
Switch Platform Hardware Overview
Figure 4 shows the front view of the switch. The figure shows port configurations for the switch
systems, interface connectors, and various status LEDs.
Figure 4: Switch System Front Panel
All connectivity is via the connector side panel. All connectors can support active cables.
3.1.1
LED Assignments
3.1.1.1 System Status Indicators
The System Status Indicators are located on the left side of the front (connector side) panel. The
system status indicators should display as follows:
When the switch is plugged in, within four minutes the following LEDs should be evident.
• The Status LED
should light up green.
• The Fan LED
should light up green.
• The Bad Port LED
should be off.
• The Unit ID LED should be off.
Figure 5: Status LEDs
SX1016
UID
Mellanox
RST
UID
RST
