Dismantling Guide
Rev. 1.0
Mellanox Technologies Confidential
9 of 12
To extract a PSU:
1.
Disconnect the ground from the power supply.
2.
Disconnect, cut or unscrew the power supply cord from the power supply unit.
3.
Unscrew the power supply from the mechanical enclosure.
1.5
Extracting the Fan Unit
The Fan unit is located in the middle of the system.
Figure 4
Fan Location
1.
Disconnect the harnesses from the fan unit to the board.
2.
Disassemble the 3 screws attaching the Fan wall to the bottom of the mechanical
enclosure base.
