Hardware Installation
Rev 2.5
21
Mellanox Technologies
5. Applying even pressure on four corners of the card (as shown in the below picture), insert the
adapter card into the PCI Express slot until firmly seated.
6. Secure the adapter with the adapter clips or screws.
a. Maximum supported cap screw dimensions: cap diameter - 5.5[mm] cap height - 1.7[mm].
b. Recommended tightening torque value - 0.33[Nm]/2.9[in lb].
7. Close the system case.
3.5
Cables and Modules
To obtain the list of supported cables for your adapter, please refer to:
http://www.mellanox.com/products/interconnect/cables-configurator.php
3.5.1 Cable Installation
1. All cables can be inserted or removed with the unit powered on.
2. To insert a cable, press the connector into the port receptacle until the connector is firmly
seated.
a. Support the weight of the cable before connecting the cable to the adapter card. Do this by using a cable
holder or tying the cable to the rack.
b. Determine the correct orientation of the connector to the card before inserting the connector. Do not try and
insert the connector upside down. This may damage the adapter card.
Do not use excessive force when seating the card, as this may damage the system or
the adapter.