background image

IPsec Offload Software Installation and Operation

Rev 1.8

27

Mellanox Technologies

Example
The following command will create a MLNX_OFED_LINUX ISO image for RedHat 7.2 under 
the /tmp directory.

• The  script  adds  the  following  lines  to 

/etc/security/limits.conf

  for  the  userspace 

components such as MPI:

• * soft memlock unlimited

• * hard memlock unlimited

• These settings set the amount of memory that can be pinned by a user space application to 

unlimited. If desired, tune the value unlimited to a specific amount of RAM.

# ./MLNX_OFED_LINUX-x.x-x-rhel7.2-x86_64/mlnx_add_kernel_support.sh -m /tmp/
MLNX_OFED_LINUX-x.x-x-rhel7.1-x86_64/ --make-tgz
Note: This program will create MLNX_OFED_LINUX TGZ for rhel7.2 under /tmp directory.
All Mellanox, OEM, OFED, or Distribution packages will be removed.
Do you want to continue?[y/N]:y
See log file /tmp/mlnx_ofed_iso.21642.log

Building OFED RPMs. Please wait...
Removing OFED RPMs...
Created /tmp/MLNX_OFED_LINUX-x.x-x-rhel7.1-x86_64-ext.tgz

-c|--config <packages config_file>

Example of the configuration file can be found under docs

-n|--net <network config_file>

Example of the network configuration file can be found 
under docs

-k|--kernel-version <kernel 
version>

Use provided kernel version instead of 'uname -r'

-p|--print-available

Print available packages for current platform and create 
corresponding ofed.conf file

--with-32bit

Install 32-bit libraries

--without-32bit

Skip 32-bit libraries installation (Default)

--without-depcheck

Skip Distro's libraries check

--without-fw-update

Skip firmware update

--fw-update-only

Update firmware. Skip driver installation

--force-fw-update

Force firmware update

--force

Force installation

--all|--hpc|--basic|--msm

Install all, hpc, basic or Mellanox Subnet manager 
packages correspondingly

--vma|--vma-vpi

Install packages required by VMA to support VPI

--vma-eth

Install packages required by VMA to work over Ethernet

--with-vma

Set configuration for VMA use (to be used with any 
installation parameter).

--guest

Install packages required by guest os

Summary of Contents for Innova IPsec





































































Reviews: