ConnectX-4 100Gb/s Ethernet Dual Port Adapter Card User Manual for Dell PowerEdge
Rev 1.2
Mellanox Technologies
20
3.8.2
Card Un-installation
1. Verify that the system is powered off and unplugged.
2. Wait 30 seconds.
3. To remove the card, disengage the retention mechanisms on the bracket (clips or screws).
4. Holding the adapter card from its center, gently pull the adapter card from the PCI Express
slot.
5. When the port connectors reach the top of the chassis window, gently pull the adapter card in
parallel to the motherboard.
3.9
Identify the Card in Your System
3.9.1
On Windows
1. Open Device Manager on the server. Click start => Run, and then enter “devmgmt.msc”.
Please note that the following images are for illustration purposes only.
