Melive Technology Co., Ltd
- 4 -
Press and hold the “Power off” button for 4sec. to turn the camera off.
To use the remote, please code first before power on the camera.
Coding procedures:
1. Press and hold the “Picture” & “Video” keys of the remote at the same
time, then turn the camera on;
2. When the camera enters into the real live interface, release the
“Picture” & “Video” keys;
3. The middle blue indicator lights up, then the coding is finished.
Note:
Please keep holding the “Picture” & “Video” keys during coding;
Only need to code once, afterwords the camera will recognize
automatically;
WiFi function & remote controller can not be used simultaneously.
Setup Your T86+
Turn the camera on- press and hold the POWER button for several
seconds.
When the camera is on, the Melive logo will appear on the screen and the
three red LED lights will glow red. The camera is now in video mode.